HEADING_CONTACT_US_POPUP_TITLE

HEADING_CONTACT_US_POPUP_SUBTITLE

VH45DE

Displaying 1 to 10 (of 12 products) View All
  • Mazworx Engine Mounts VH45DE into S13/S14

    Mazworx Engine Mounts VH45DE into S13/S14

    (0)
    Genuine Mazworx VH45DE S-Chassis conversion mounts. These mounts are to put the VH45DE in an S13/S14 chassis.  They come with Urethane and are powdercoated black. 
    $390.00
    ... more info
  • Mazworx Power Steering Adaptor Kit VH into S Chassis

    Mazworx Power Steering Adaptor Kit VH into S Chassis

    (0)
    The kit includes everything you need. High Pressure Line with adapter fittings, Low pressure line, feed line, fire sleeve and misc hardware.
    $150.00
    ... more info
  • Mazworx VH45DE Headers S13/S14

    Mazworx VH45DE Headers S13/S14

    (1)
    Genuine Mazworx VH45DE S-Chassis Headers. These headers are for the VH45DE swap into an S13/S14 chassis. The stock manifolds on the VH do not clear the frame rails or steering column. So using these headers clears them and also gives you more power with the header construction. They come as a pair and the have a high-temp silver coating. Some...
    $889.00
    ... more info
  • Mazworx VH45DE Intake System

    Mazworx VH45DE Intake System

    (0)
    This kit comes complete with the intake tube, couplers, hose clamps, MAF adapter and AEM filter.
    $150.00
    ... more info
  • Supertech Single Springs and Titanium Retainers for VH45DE

    Supertech Single Springs and Titanium Retainers for VH45DE

    (0)
    Supertech just released a complete set of single springs and titanium retainers for the VH45DE. This springs ups the factory 49 lbs of seat pressure to 77 lbs. Allows you to turn the motor faster without the worry of valve float. These are recommended for turbo engine and if installing the upgraded cams.
    $589.00
    ... more info
  • VG Trans to VH Engine Apapter

    VG Trans to VH Engine Apapter

    (0)
    This if to adapter a VH motor to a VG trans. Includes the adapter plate, bellhousing machining, and hardware. You will need to send us the bellhousing for machining or contact us for a whole trans. Other parts you may need is the shifter plate and shifter (sold seperately).
    $390.00
    ... more info
  • VH/VG S-Chassis Install Kit

    VH/VG S-Chassis Install Kit

    (0)
    This kit allows you to install the VH45DE with the Z32 transmission to your S13/S14 chassis. The kit includes: motor mounts, machine work, hardware, adapter plate, shifter, brackets, one-piece driveshaft, etc.. You source the transmission (90-96 NA or TT) and send us the bellhousing (or you can purchase from us). Then we send you back the kit with...
    $1,550.00
    ... more info
  • VH/VH into S Chassis Conversion Wiring Harness

    VH/VH into S Chassis Conversion Wiring Harness

    (0)
    We will need you to send in your KA engine harness and, if possible, the four plus off the body harness of the Q45 donor car underneath the dash.  We will build you a jumper harness that will require no modification to the VH harness.  This will ensure your swap is wired properly.
    $235.00
    ... more info
  • VH45DE Stage 1 Cam Regrinds

    VH45DE Stage 1 Cam Regrinds

    (0)
    These cams are mild regrinds of the stock cores. They offer as much lift and duration you can get out of the stock lobes. You will need to send your stock cores in for exchange. Also recommend the spring and retainer upgrade when using these cams.
    $1,150.00
    ... more info
  • VH45DE Stage 1 ROM ECU Tune

    VH45DE Stage 1 ROM ECU Tune

    (0)
    Custom ECU Tune. This ROM tune will increase your rev limiter, eliminate speed cut and optimize the high rpm fuel and timing curve. We need a core ECU in exchange.
    $345.00
    ... more info
Displaying 1 to 10 (of 12 products) View All